After some thought (Yes I am capable!) I took a turn into Corpach Boatyard in Lochaber and met a very knowledgeable shipwright, called Sandy, and we had a long discussion about what to do with the Lady 'in her present condition'.
As you know she is presently on her starboard side with the tide flowing through her on a daily basis, I personally don't think thats to big an issue as she is not moving and lets face it the corrosion doesnt matter at the present state of the repair schedule.
However, the weather is getting a bit poorly now and all it would take is a half decent blow from the West and then I would be dealing with more than parted seams!
The main disussion with Sandy was on what to do with the Lady if she could not come out the water on Kerrera because of her weight.
Obviously, the Corpach yard can take her and do a full repair and I am going to have them give me a full quote to make her watertight and sea worthy again, the earliest that it could all come together is January as they have obligations to other boats meantime.
But meantime there is the issue of moving her and getting her somewhere that doesnt cost £110 a week to be tied up against a car park!
The answer is legs methinks and then tuck her into a corner somewhere until the yard can work their magic..
One thought is to drill a rib and a plank and attach a birch log leg slighty aft of amidships. This would stablilise her to a point and then I could maybe put another leg slightly forward. It would add extra strength in the long run.
I am going to have to take advice before I start drilling right enough, I also have to persuade the previous owner of the Lady to supply me with the wood for the project.
Sorry I cant get any pictures up at the moment something is wrong with the software. I'll look into it in the near future.
I have a whole lot more to talk about, but I think its more appropriate to put it on the website which is still being constructed....dont hold your breath!
I'll probably leave the blog until next week, when Sandy the Shipwright gives her a going over for the quote from the yard. Unless something happens of course.
Sorry about the spelling as well, spell checker is duff as well on this software!!
Aye
Kered
Welcome to the Lady Evelyn Restoration Project. If you wish to contact us privately please use - admin@rebuildalittleship.co.uk please note that inappropriate comments will be deleted
Thursday, October 28, 2010
Monday, October 25, 2010
Previous blog
Sorry for some reason I cannot upload my pictures to the blog or get the spell check to work. So I aplogise for the inconvenience!
Kered
Kered
Day 7
Wednesday, October 13, 2010
Day 6 - No movement
Not the best day. She was just not for lifting and the pump would not cope.
Basically I went down at 6 this morning and sorted the pump out. The pipe had blocked at the joint we had put in, with seaweed. It took half an hour to get it clear which proved that we would not have been able to have done it last night, especially in the dark!
Where the boat is sitting at the moment is one of those places in the harbour that get effected by the tide very easily, by that I mean that the difference between 0.1 and 0.2 on the tide table is equivalent of 4 feet in this harbour.
Because of this, I could not get down near the hull as there was 3 feet at he stern and about a foot at the bow of water. Wellies, sadly are not big enough!!
When the boat lifted the other day, she moved about 6 feet in towards the quayside and she is now leaning slightly on the quay. I think this has caused the planking, where she is touching the quay, to split allowing more water to leak in causing the pump not to be able to cope.
I am at a wee bit of a loss as to how to procede. The pump really has to go back to its owner and I think we actually need a larger diameter pump to be able to cope with what has happened. Gawd knows where I am going to get a pump to be able to deal with this.
Maybe the plus point is that we have a week until the tide starts to make again and that gives me some time to source another pump.
Well, watch this space! A big change to this blog will be taking place over the next couple of days. Rebuildalittleship.blogspot will become rebuildalittleship.co.uk. Now that we own the site we can build on that, allowing us to provide links to advertisers, other blogs as well as to let us sell some bits and pieces that are surplus to requirement....oh yeah also have a begging page as well.
No pictures today as there was nothing different to see.
More soon
Aye
Kered
Basically I went down at 6 this morning and sorted the pump out. The pipe had blocked at the joint we had put in, with seaweed. It took half an hour to get it clear which proved that we would not have been able to have done it last night, especially in the dark!
Where the boat is sitting at the moment is one of those places in the harbour that get effected by the tide very easily, by that I mean that the difference between 0.1 and 0.2 on the tide table is equivalent of 4 feet in this harbour.
Because of this, I could not get down near the hull as there was 3 feet at he stern and about a foot at the bow of water. Wellies, sadly are not big enough!!
When the boat lifted the other day, she moved about 6 feet in towards the quayside and she is now leaning slightly on the quay. I think this has caused the planking, where she is touching the quay, to split allowing more water to leak in causing the pump not to be able to cope.
I am at a wee bit of a loss as to how to procede. The pump really has to go back to its owner and I think we actually need a larger diameter pump to be able to cope with what has happened. Gawd knows where I am going to get a pump to be able to deal with this.
Maybe the plus point is that we have a week until the tide starts to make again and that gives me some time to source another pump.
Well, watch this space! A big change to this blog will be taking place over the next couple of days. Rebuildalittleship.blogspot will become rebuildalittleship.co.uk. Now that we own the site we can build on that, allowing us to provide links to advertisers, other blogs as well as to let us sell some bits and pieces that are surplus to requirement....oh yeah also have a begging page as well.
No pictures today as there was nothing different to see.
More soon
Aye
Kered
Tuesday, October 12, 2010
Day 5 - Three steps back
Just a quick note tonight.
We managed to pump her dry again fairly quickly and when the tide went out also managed to caulk a few of the bigger holes in the planking on the port side. I am impressed that there is no rot or soft wood anywhere which makes for less work in the planking repair department!
Note - There is going to have to be a complete strip down and re-caulk of the entire vessel, deck as well. Big job, but its going to have to be done.
Sadly the pump started playing funny buggers towards the end of the day and because it was getting dark and the water ingress had to be kept on top of, we decided to call it quits and give it another go in the morning.
The pics show how she settle last night and also a wee bit of the cauling undertaken today.
Wish us luck tomorrow, I hope that the luck the previous owner of the vessel had is not carried on to us after todays carry on!!
Aye
Kered
We managed to pump her dry again fairly quickly and when the tide went out also managed to caulk a few of the bigger holes in the planking on the port side. I am impressed that there is no rot or soft wood anywhere which makes for less work in the planking repair department!
Note - There is going to have to be a complete strip down and re-caulk of the entire vessel, deck as well. Big job, but its going to have to be done.
Sadly the pump started playing funny buggers towards the end of the day and because it was getting dark and the water ingress had to be kept on top of, we decided to call it quits and give it another go in the morning.
The pics show how she settle last night and also a wee bit of the cauling undertaken today.
Wish us luck tomorrow, I hope that the luck the previous owner of the vessel had is not carried on to us after todays carry on!!
Aye
Monday, October 11, 2010
Day 4 - Afloat!!
Thats her afloat!
She came up on the tide after we spent time today caulking the major leak's on the deck and the hull.
There was quite a bit of work involved in getting her up, it turns out that the pump we are using has garbage 'cruncher' impeller built in, so this meant we could remove the filter and let the pump suck up the sea weed. This helped a lot and after we extended the intake pipe we could mount the pump away from the gunwale.
It makes life easier when we have to return the pump and are back to working by hand.
My brother was on the job most of the day, but tomorrows big job is to reach him how to tie knots!!.... over hand knots holding a 60 foot trawler alongside?? no I think not..
An inspection of the interior made for an interesting time. The ribs in the boat are very large, especially around the engine beds, everything is painted white and hopefully they will come up when we can finally get in a clean her.
The engine is showing signs of being under water with a lot corrosion, not as bad as it could have been right enough but needs a good look at. I think its going to be a huge job for it be removed, but hey ho its going to have to happen.
Pyeod (Pi-od, pie-od, py-ode..etc I cant find the correct spelling on line or in fact any details about the engine. Once I get in and around proper I will get the information form the engines manufacture plate.
I would be interested for any comments about a replacement engine. Obviously we don't need to have 330 Turbo (which is what the size is at present) so it would be nice to get a smaller more economical engine that would take the py-ods place.
Well, more caulking tomorrow. The tools I won on eBay have arrived, too late for today's effort but a large coal chisel did the job (and a damn fine one!!).
The pictures are of the interior and some of the vessel upright.
More tomorrow
Aye
Kered
She came up on the tide after we spent time today caulking the major leak's on the deck and the hull.
There was quite a bit of work involved in getting her up, it turns out that the pump we are using has garbage 'cruncher' impeller built in, so this meant we could remove the filter and let the pump suck up the sea weed. This helped a lot and after we extended the intake pipe we could mount the pump away from the gunwale.
It makes life easier when we have to return the pump and are back to working by hand.
My brother was on the job most of the day, but tomorrows big job is to reach him how to tie knots!!.... over hand knots holding a 60 foot trawler alongside?? no I think not..
An inspection of the interior made for an interesting time. The ribs in the boat are very large, especially around the engine beds, everything is painted white and hopefully they will come up when we can finally get in a clean her.
The engine is showing signs of being under water with a lot corrosion, not as bad as it could have been right enough but needs a good look at. I think its going to be a huge job for it be removed, but hey ho its going to have to happen.
Pyeod (Pi-od, pie-od, py-ode..etc I cant find the correct spelling on line or in fact any details about the engine. Once I get in and around proper I will get the information form the engines manufacture plate.
I would be interested for any comments about a replacement engine. Obviously we don't need to have 330 Turbo (which is what the size is at present) so it would be nice to get a smaller more economical engine that would take the py-ods place.
Well, more caulking tomorrow. The tools I won on eBay have arrived, too late for today's effort but a large coal chisel did the job (and a damn fine one!!).
The pictures are of the interior and some of the vessel upright.
More tomorrow
Aye
Sunday, October 10, 2010
Day 3 - Still on her side
Today was a bit of an eye opener, I think I have had that "What the hell am I doing??" moments...
She is a huge boat and although she has no rot, the corrosion is pretty bad on all the metal areas exposed to the outside. I spent a good part of the day checking the metalwork and then the woodwork.
On the wood side of things most of the vessel is solid except where the stantions meet the deck on the gunwales. I am sure this is down to the fact she has been on a mooring for a long time and has possibly had fresh water lying on her decks, if anyone has any other ideas let me know.
The metal work is in a hell of a state but on a positive side nothing is rusted through, it seems to be solid once the surface is detritus is removed. I think that if I remove the surface rust at the moment then I would have problems as its going to take some amount of time and paint! to get right so it will safer as is.
We still did not manage to get her upright and it took two hours to pump her dry.
After hoping that the pump would cope with the ingress when the tide came back in, it was a fools errand. The gunwale and the deck amidships were badly split and needing caulked, although I am sure its not the worst place I am positive it is one of them.
So guess who's going to be patching and caulking tomorrow (On the assumption that the tools and caulking twine ordered last week arrive).
Thankfully my chief bilge rat was back today, full of excuses about being 'tired' and 'sleeping' through a Saturday but at least he appeared!! The rest of the crew were down and being as helpful as small boys can be on a big climbing frame, so plenty of biscuits and juice were on hand to keep up spirits and that along with the beautiful blue skies and the thought that one day we would be afloat on her.... well lets say it was a better day than yesterday.
Today was really the first time I have been inside the main hull and had access to the accomodation and engine room. The interior is caked in oil and has plenty of sea-weed rotting in the bilges (The pump choked a couple of times and it was F'n awful to clean!) so it made for a slippy dangerous rummage around. I think that steam cleaning is going to be the only way to clean her up.
She has lovely white painted wood forward and the accomodation was all unpainted bare paneled dark wood. I hope that it all cleans up well.
The battery went flat on the camera so I only managed to get a couple of pics before the thing went dead. We will be back on tomorrow so I will get more detailed photo's then.
Sadly thats it today, hopefully some more positive news tomorrow (and better pic's!).
Aye
Kered
She is a huge boat and although she has no rot, the corrosion is pretty bad on all the metal areas exposed to the outside. I spent a good part of the day checking the metalwork and then the woodwork.
On the wood side of things most of the vessel is solid except where the stantions meet the deck on the gunwales. I am sure this is down to the fact she has been on a mooring for a long time and has possibly had fresh water lying on her decks, if anyone has any other ideas let me know.
The metal work is in a hell of a state but on a positive side nothing is rusted through, it seems to be solid once the surface is detritus is removed. I think that if I remove the surface rust at the moment then I would have problems as its going to take some amount of time and paint! to get right so it will safer as is.
We still did not manage to get her upright and it took two hours to pump her dry.
After hoping that the pump would cope with the ingress when the tide came back in, it was a fools errand. The gunwale and the deck amidships were badly split and needing caulked, although I am sure its not the worst place I am positive it is one of them.
So guess who's going to be patching and caulking tomorrow (On the assumption that the tools and caulking twine ordered last week arrive).
Thankfully my chief bilge rat was back today, full of excuses about being 'tired' and 'sleeping' through a Saturday but at least he appeared!! The rest of the crew were down and being as helpful as small boys can be on a big climbing frame, so plenty of biscuits and juice were on hand to keep up spirits and that along with the beautiful blue skies and the thought that one day we would be afloat on her.... well lets say it was a better day than yesterday.
Today was really the first time I have been inside the main hull and had access to the accomodation and engine room. The interior is caked in oil and has plenty of sea-weed rotting in the bilges (The pump choked a couple of times and it was F'n awful to clean!) so it made for a slippy dangerous rummage around. I think that steam cleaning is going to be the only way to clean her up.
She has lovely white painted wood forward and the accomodation was all unpainted bare paneled dark wood. I hope that it all cleans up well.
The battery went flat on the camera so I only managed to get a couple of pics before the thing went dead. We will be back on tomorrow so I will get more detailed photo's then.
Sadly thats it today, hopefully some more positive news tomorrow (and better pic's!).
Aye
Saturday, October 09, 2010
Day 2 - Lots of help, but the wrong kind.
Finally managed to source a pump, all singing and dancing but unfortunetly I think its only a two inch.....Oh well....beggers choosing and all that.
We managed to lift the pump onboard, if you have read previous entries you know its about 20 feet or so down to the gunwale from the quayside, after a walk along the esplanade and across a very slippery and seaweedy beach.
My 13 year old son was leading the way but ill be buggered if I know where he was going as we ended up crossing the most difficult part of the beach!
Never trust a 13 year old who is more interested in games machines than his fathers 'boring boat'....Gawd only knows where his mind was.
Anyway after much consternation, my back exploding and a few choice 'french' words, the pump got onboard just as the tide reached halfway up the keel.
Because we took so long getting the pump and then the back breaking effort of a cripple and three hero's, we missed the chance to pump her out before the tide came in and that was the fatal lapse in the days plan.
We needed the boat pumped out before the sea came up as the pump would not be able to cope with the ingress and the water already there.
It turned out that it was a good exercise in what the pump could do and what was going to happen before she finally lifts, we could do with this all happening three days ago of course!!
The reason for the lack of help today was due to a brother of mine deciding that women and drink were a far better option than helping get the Lady afloat. Good to know that he is up for the challenge.
The boys were stars and did a fair bit of the grafting... and then the incessant talking!
The pictures give a picture of what went on.
On a quick final note, crew member number two managed to work out that the deck was like ice after managing to slip the whole 19 feet of the deck to the deepest part of the gunwale... The water was up to his waste...
Oh well it made for a laugh at the time!! There is a drying out pic as well!!
The boat is in a good position for meeting people and many folk are interested in whats going on, its probably the best photographed vessel on the West Coast for the time being sadly for all the wrong reasons.
One person I chatted to was Bob from Ardrishaig, it turns out that he is a welder and works on boats. That's the kind of person you want to meet especially when your boat is partly made of the stuff and corroded to hell!! Bob also gave a contact for various woods in Balloch near Dumbarton.
Well its back down to the old Lady in the morning for another attempt at pumping her dry.
Maybe be on better form tomorrow along with better news.
Aye
Kered
We managed to lift the pump onboard, if you have read previous entries you know its about 20 feet or so down to the gunwale from the quayside, after a walk along the esplanade and across a very slippery and seaweedy beach.
My 13 year old son was leading the way but ill be buggered if I know where he was going as we ended up crossing the most difficult part of the beach!
Never trust a 13 year old who is more interested in games machines than his fathers 'boring boat'....Gawd only knows where his mind was.
Anyway after much consternation, my back exploding and a few choice 'french' words, the pump got onboard just as the tide reached halfway up the keel.
Because we took so long getting the pump and then the back breaking effort of a cripple and three hero's, we missed the chance to pump her out before the tide came in and that was the fatal lapse in the days plan.
We needed the boat pumped out before the sea came up as the pump would not be able to cope with the ingress and the water already there.
It turned out that it was a good exercise in what the pump could do and what was going to happen before she finally lifts, we could do with this all happening three days ago of course!!
The reason for the lack of help today was due to a brother of mine deciding that women and drink were a far better option than helping get the Lady afloat. Good to know that he is up for the challenge.
The boys were stars and did a fair bit of the grafting... and then the incessant talking!
The pictures give a picture of what went on.
Oh well it made for a laugh at the time!! There is a drying out pic as well!!
The boat is in a good position for meeting people and many folk are interested in whats going on, its probably the best photographed vessel on the West Coast for the time being sadly for all the wrong reasons.
One person I chatted to was Bob from Ardrishaig, it turns out that he is a welder and works on boats. That's the kind of person you want to meet especially when your boat is partly made of the stuff and corroded to hell!! Bob also gave a contact for various woods in Balloch near Dumbarton.
Well its back down to the old Lady in the morning for another attempt at pumping her dry.
Maybe be on better form tomorrow along with better news.
Aye
Kered
Friday, October 08, 2010
DAY 1 - We will never talk of this day again!!
Today was supposed to be about getting her afloat, upright and tied up tight alongside so that we could start getting all the leaks patched for her short move to the boatyard.
What today turned into was a fiasco of comedic proportions that Fawlty Towers would have been proud of!!
First of all, how difficult is it to locate a marine petrol or diesel water pump??
I can tell you its a nightmare.
I had made the assumption that when you go to a plant hire, you could get one off the shelf or at least come away with the idea that you are going to get one in the near future.
How wrong was I??
Very methinks, it turns out that you can walk in fine and ask for one,but dont expect them to actually have one or tell you when one will be in from hire!
How the hell do these places keep track of their stock?
Anyway, that was more or less done,dusted and that option exhausted at 0900 this morning.
The next move was to go around to another plant hire operator, who it turned out was on holiday but had a guy running the place while he was away.
Well the guy running the place was AWOL!! and the shop next door was taking messages for him and surprise surprise I am still awaiting a call back.
It was now about 1030 so I decided a coffee and sandwich were in order and a rethink of where we could get the pump was needed.
We decided that another marine engineer out of town was worth a try so we headed up to his workshop about three miles down the road.
The manager was very nice and showed us three pumps that were ok, but really only one of them was fit for our purpose.
Sadly we could not hire the equipment then and there as it belonged to the actual owner of the company and we told that we needed to get his authorisation for the deal.
So off we traipsed back into town and up to the office of the business owner to plead our case.
When we arrived he was nowhere to be seen so I felt that now was a good time to go shopping for my sons twelveth birthday present the time now was 1130.
I made it back to the office by 1200 and met up with the owner who was on good form and immediatly authorised the use of the pump from the workshop.
So back out of town and into the workshop for the pump unit, now heres where even more fun started.
The engineer on the premises gave us an all 'singing and dancing' diesel pump, he fired it up and told us it had been serviced recently and it was very powerful.
However it had bits missing and we could buy them from the local tool hire place..... Guess where we went after loading the pump up?? yep..back to the first plant hire people and a mere £15 later we had the connector and a length of pipe (Free!! the desk guy was symapthetic to our cause by now..).
Ok now to the boat as it was now an hour after low water (1330) and we were keen to get her (Lady Evelyn) dry ASAP and keep as much water at bay until she floated. On the pier side we realised that the deck was 15 feet below us, ok this is where my old Seamanship Teacher would have been proud of me! so a couple of bowlines and brute strength along with a pivoting system to stop the pump being wrecked against the was all in place and away the pump went down the quayside. If you have never shifted a diesel pump its quite a beast to manhandle.
However with some swearing, it made it and all the relevant piping was attached.
The pump started fine, but for the love of anyone it would not suck up any water. We primed, re-primed, changed hose connectors, filled pipes with water and eventually gave up! cursing the thing, now what the hell was wrong with it??
To be fair we were pretty knackered and p*^%&$ off by now. We thought it was something stupid, but I have used these things in various situations and in fact used to spend hours training with them while working with the Coast Recue Team in my Auxilliary Coastguard days so I was pretty much sure it was not us that was at fault....but then it had been serviced before we collected it...Allegedly...
It was then that I had to get the car to my 'very tolerant' partner so I decided to leave my second in command (My Brother)to deal with the bloody pump and nipped off for half an hour.
By the time I returned the housing was apart and the impellor, or rather what was left of the impellor was in a bucket.
It turned out that once the housing was opened it was easy to see that although the pump may have been serviced, it had been used.
How did we know this?? that would have been down to the big bloody 'stones' that had destroyed the interior of the housing and impellor that were included in the mish mash of materials that was now sitting in a bucket.
So it was a case of phoning the office/engineers shop and tell them the good news.
Now I expected this to be a hassle, but to be fair the owner of the business told us to go anywhere and get an impellor and he would pay for it but of course, you will have guessed by now, there was no way we were going to find one in this small town!!
We had to try though so off we went for a wander, leaving said pump high and dry.....
Or so we thought....
I swore I heard my brother say "I left the pump well out the way of the water, it will be ok for a while yet..." or words to those effect.
When we finally got back to the boat at around 1700 the F&^%$* thing was just about covered.
Yet despite previous conversation here was the pump sitting right where it had been set up earlier with water just about to enter all the various inlets and outlets engines tend to have.
An immediate panicked extraction was undertaken and the thing was hauled unceremoniously up the side of the quay and words were had.... I'm apparantly deaf and useless even though I had left him for an hour on the boat on his own!!
Never mind. It was the enevitable end to a very long and non productive yet physical day.
The boat didnt move an inch and we have major pump issues that we are unsure of how to resolve as nobody seems to be able to hire us a pump.
Oh well as the discussion after the pump was hauled up the quay side went..."Lets never mention this day again"
More soon
Aye
Kered
P.S the pump?? Well its running fine albeit with no pump housing on it.
The bucket with the bits floating off!! K.
What today turned into was a fiasco of comedic proportions that Fawlty Towers would have been proud of!!
First of all, how difficult is it to locate a marine petrol or diesel water pump??
I can tell you its a nightmare.
I had made the assumption that when you go to a plant hire, you could get one off the shelf or at least come away with the idea that you are going to get one in the near future.
How wrong was I??
Very methinks, it turns out that you can walk in fine and ask for one,but dont expect them to actually have one or tell you when one will be in from hire!
How the hell do these places keep track of their stock?
Anyway, that was more or less done,dusted and that option exhausted at 0900 this morning.
The next move was to go around to another plant hire operator, who it turned out was on holiday but had a guy running the place while he was away.
Well the guy running the place was AWOL!! and the shop next door was taking messages for him and surprise surprise I am still awaiting a call back.
It was now about 1030 so I decided a coffee and sandwich were in order and a rethink of where we could get the pump was needed.
We decided that another marine engineer out of town was worth a try so we headed up to his workshop about three miles down the road.
The manager was very nice and showed us three pumps that were ok, but really only one of them was fit for our purpose.
Sadly we could not hire the equipment then and there as it belonged to the actual owner of the company and we told that we needed to get his authorisation for the deal.
So off we traipsed back into town and up to the office of the business owner to plead our case.
When we arrived he was nowhere to be seen so I felt that now was a good time to go shopping for my sons twelveth birthday present the time now was 1130.
I made it back to the office by 1200 and met up with the owner who was on good form and immediatly authorised the use of the pump from the workshop.
So back out of town and into the workshop for the pump unit, now heres where even more fun started.
The engineer on the premises gave us an all 'singing and dancing' diesel pump, he fired it up and told us it had been serviced recently and it was very powerful.
However it had bits missing and we could buy them from the local tool hire place..... Guess where we went after loading the pump up?? yep..back to the first plant hire people and a mere £15 later we had the connector and a length of pipe (Free!! the desk guy was symapthetic to our cause by now..).
Ok now to the boat as it was now an hour after low water (1330) and we were keen to get her (Lady Evelyn) dry ASAP and keep as much water at bay until she floated. On the pier side we realised that the deck was 15 feet below us, ok this is where my old Seamanship Teacher would have been proud of me! so a couple of bowlines and brute strength along with a pivoting system to stop the pump being wrecked against the was all in place and away the pump went down the quayside. If you have never shifted a diesel pump its quite a beast to manhandle.
However with some swearing, it made it and all the relevant piping was attached.
The pump started fine, but for the love of anyone it would not suck up any water. We primed, re-primed, changed hose connectors, filled pipes with water and eventually gave up! cursing the thing, now what the hell was wrong with it??
To be fair we were pretty knackered and p*^%&$ off by now. We thought it was something stupid, but I have used these things in various situations and in fact used to spend hours training with them while working with the Coast Recue Team in my Auxilliary Coastguard days so I was pretty much sure it was not us that was at fault....but then it had been serviced before we collected it...Allegedly...
It was then that I had to get the car to my 'very tolerant' partner so I decided to leave my second in command (My Brother)to deal with the bloody pump and nipped off for half an hour.
By the time I returned the housing was apart and the impellor, or rather what was left of the impellor was in a bucket.
It turned out that once the housing was opened it was easy to see that although the pump may have been serviced, it had been used.
How did we know this?? that would have been down to the big bloody 'stones' that had destroyed the interior of the housing and impellor that were included in the mish mash of materials that was now sitting in a bucket.
So it was a case of phoning the office/engineers shop and tell them the good news.
Now I expected this to be a hassle, but to be fair the owner of the business told us to go anywhere and get an impellor and he would pay for it but of course, you will have guessed by now, there was no way we were going to find one in this small town!!
We had to try though so off we went for a wander, leaving said pump high and dry.....
Or so we thought....
I swore I heard my brother say "I left the pump well out the way of the water, it will be ok for a while yet..." or words to those effect.
When we finally got back to the boat at around 1700 the F&^%$* thing was just about covered.
Yet despite previous conversation here was the pump sitting right where it had been set up earlier with water just about to enter all the various inlets and outlets engines tend to have.
An immediate panicked extraction was undertaken and the thing was hauled unceremoniously up the side of the quay and words were had.... I'm apparantly deaf and useless even though I had left him for an hour on the boat on his own!!
Never mind. It was the enevitable end to a very long and non productive yet physical day.
The boat didnt move an inch and we have major pump issues that we are unsure of how to resolve as nobody seems to be able to hire us a pump.
Oh well as the discussion after the pump was hauled up the quay side went..."Lets never mention this day again"
More soon
Aye
Kered
P.S the pump?? Well its running fine albeit with no pump housing on it.
 |
| Add caption |
Thursday, October 07, 2010
The Lady
The Lady Evelyn is 59 feet with a breadth of 19 feet, built of Oak and was build in 1972.
She is of Southern Irish fame and was lastly used for Pelagic fishing (Pelagic means Mackerel,sprats or Herring).
I believe the method used was ring netting judging by the marks on her decks and where various fittings sit.
She was fitted with a 330hp Pyeod (Spelling is wrong) and since this has been flooded it will be replace with a lighter 180hp model (to be decided). As with most Irish vessels of her year and type, her engine is located in the forward section of the vessel. This has advantages and disadvantages which we can discuss at a later date.
The present condition of the vessel is pretty poor, although a complete hull. She has been on her side for almost a year and because of this she is showing wear and tear to most of her seams on the starboard side. Whilst the water has been allowed to run in and out of her for that time, this actually has done little damage other than have everything covered in a light covering of oil.
All deck gear is very badly corroded with the mast stays being the worst. Even the anchor on deck has been hellishly damaged with corrosion.
She has had a fair bit of her equipment removed or destroyed. The helm and throttle controls have gone, the interior has been dismantled and allowed to fall into the water that could get into the various sections and finally everything is covered in a sheene of oil (as mentioned).
The pictures don't do much justice to the actual condition but give a good idea.
So thats the boat! I will update the history as I find it out and I will add in details of everything that happens from now on as tomorrow it all starts!!
Yours Aye
Kered
She is of Southern Irish fame and was lastly used for Pelagic fishing (Pelagic means Mackerel,sprats or Herring).
I believe the method used was ring netting judging by the marks on her decks and where various fittings sit.
She was fitted with a 330hp Pyeod (Spelling is wrong) and since this has been flooded it will be replace with a lighter 180hp model (to be decided). As with most Irish vessels of her year and type, her engine is located in the forward section of the vessel. This has advantages and disadvantages which we can discuss at a later date.
The present condition of the vessel is pretty poor, although a complete hull. She has been on her side for almost a year and because of this she is showing wear and tear to most of her seams on the starboard side. Whilst the water has been allowed to run in and out of her for that time, this actually has done little damage other than have everything covered in a light covering of oil.
All deck gear is very badly corroded with the mast stays being the worst. Even the anchor on deck has been hellishly damaged with corrosion.
She has had a fair bit of her equipment removed or destroyed. The helm and throttle controls have gone, the interior has been dismantled and allowed to fall into the water that could get into the various sections and finally everything is covered in a sheene of oil (as mentioned).
The pictures don't do much justice to the actual condition but give a good idea.
So thats the boat! I will update the history as I find it out and I will add in details of everything that happens from now on as tomorrow it all starts!!
Yours Aye
Kered
The begining
The Lady Evelyne is a 59 foot Irish built MFV (Motor Fishing Vessel), she is currently lying on her side after springing a plank almost a year ago in the harbour.
It is my intention, along with my brother, to recover her and get her sea worthy again. Its going to be a fun ride and probably the end of my brother and I as family!!
But 'hey ho' its too big an opportunity to let slip by and if you have a dream well....
Incidentally we have no money but plenty of enthusiasm and a wee bit of time so 'watch this space' as they say, I'm going to try and post as much technical information and a bit about how we get through the problems of the project. If nothing else this should make for a good read and put a smile on your face when you realise that your life will never be as complicated or difficult as ours is about to be.
If you have advice, experience you would like to share with us or even any old boats bits looking for a home (Including tools, paint, varnish, filler and anything for the boat....If you dont ask...etc) then please leave comments or get in touch, I am happy to hear from anyone and I will reply as quickly as I can.
Yours Aye
Kered
It is my intention, along with my brother, to recover her and get her sea worthy again. Its going to be a fun ride and probably the end of my brother and I as family!!
But 'hey ho' its too big an opportunity to let slip by and if you have a dream well....
Incidentally we have no money but plenty of enthusiasm and a wee bit of time so 'watch this space' as they say, I'm going to try and post as much technical information and a bit about how we get through the problems of the project. If nothing else this should make for a good read and put a smile on your face when you realise that your life will never be as complicated or difficult as ours is about to be.
If you have advice, experience you would like to share with us or even any old boats bits looking for a home (Including tools, paint, varnish, filler and anything for the boat....If you dont ask...etc) then please leave comments or get in touch, I am happy to hear from anyone and I will reply as quickly as I can.
Yours Aye
Kered
Subscribe to:
Posts (Atom)